My Siemens dishwasher is not filling with water.

4 checks of possible reasons are shown below to resolve the problem.

A dishwasher not filling with water is a common issue that can be fixed easily.
Please follow the instructions to get your dishwasher back in working order.

Step 1: Water supply.

Check if the dishwasher water supply valve is switched on before proceeding. It is easy to forget to switch it on, especially after coming back from a holiday. Be sure to also inspect for any visible damage.

Step 2: Kinked or blocked hose.

Inspect the dishwasher supply hose and untwist any visible kinks or bends.

Step-by-step guide: How to check that there are no kinks in the supply hose.

Step 3: Low water pressure.

Check the water pressure directly from the tap using a bucket. Approximately 10 litres of water per minute should flow out of the tap when fully open. Contact your fitter, if the water pressure is too low.

Step-by-step guide: How to check the water pressure.

Step 4: Filter blockage.

If the filters in the water connection of the supply or AquaStop hose are blocked, make sure to clean the filter in the inlet hose.

Step-by-step guide: How to clean the inlet filter.

Have you checked the tips and the issue isn’t solved?

If you have followed the information above but you're still having problems with your Siemens dishwasher, then you might want to have it checked out by a Siemens professional.

Repair hotline

Contact our repair hotline to get more info about Siemens repair services and arrange an appointment.

How do you evaluate these advices?

Please give us some feedback.