After certain time intervals, your appliance will recommend that you use the service programmes. Use the service programmes to clean your appliance thoroughly.
Depending on the water hardness and use of the appliance, the display will show the following messages after prior notification:
- Calc’nClean necessary. Please press menu for 3 sec.
- Please rinse milk system.
- Cleaning necessary. Please press menu for 3 sec.
- Descaling necessary. Please press menu for 3 sec.
Note:
- If you accidentally interrupt the service programme, you must reset it.
- You can combine the cleaning and descaling programmes using the Calc’nClean service.
- Clean your appliance with a soft damp cloth immediately after a service programme to remove any descaling solution residues and prevent corrosion.
Please select the topic you are interested in:
EQ.500 coffee machine: descaling.
Run the descaling programme when your appliance prompts you. The process takes approx. 30 minutes.
Step-by-step guide to start the service programme “Descaling”.
Note: This programme requires the brewing unit to be clean.
1. Press [menu] to open the menu.
2. Use
to select “Descale”.
3. Press the [ok] to start the program. The instructions in the display guide you through the program.
4. Empty the drip tray and re-insert.
5. Empty, clean and re-connect the milk container.
6. Remove the water filter (if present) and confirm.
7. Fill the empty water tank with lukewarm water up to the marking "0.5 l". Dissolve 1 descaling tablet in the water.
8. Place a container with a capacity of at least 1.0 l under the outlet system and confirm.
9. Press [ok].
The programme runs - duration approx. 19 minutes.
Note: If there is not enough descaling solution in the water tank, you will be asked to: Refill with still water and confirm.
10. Rinse out the water tank and (if removed) re-insert the water filter.
11. Pour in fresh still water up to the “max” marking and re-insert the water tank.
The programme runs - duration approx. 2 minutes.
12. Empty the container and confirm.
13. Empty the drip tray and re-insert.
14. Empty, clean and re-connect the milk container. The program has finished.
15. The appliance is ready for use again.
Recommended products.
Product is available at below online stores
In case you click on the "Visit Retailer Shop"� button a tracking of your purchasing process takes place, see data protection clause . By using the button "Visit Retailer Shop" you agree on the tracking.